The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: pinnies4me on November 07, 2008, 11:49:58 PM
-
Nuggy and I have just about finished bringing a Secret Service back
from the dead. Looking for the 50 volt flipper power board used in
Williams system 11 games up to Fire!
http://www.pinrepair.com/sys11/sys9b.jpg
Or as used in DE Secret Service and Laser Wars
http://www.pinrepair.com/de/laserwar8.jpg
Either one, they are identical.
-
Would be easy enough to make yourselves... Or if you want, I can get my act together and setup my etching tank and make the PCB for you.
-
Thanks Owen, nice offer, might have to take you up on that if one doesn't show up.
-
Thanks Owen, nice offer, might have to take you up on that if one doesn't show up.
No probs mate... let me know
-
will check tonight should have one for you
cheers
-
Thanks Craig!
-
Nuggy and I have just about finished bringing a Secret Service back
from the dead. Looking for the 50 volt flipper power board used in
Williams system 11 games up to Fire!
http://www.pinrepair.com/sys11/sys9b.jpg
Or as used in DE Secret Service and Laser Wars
http://www.pinrepair.com/de/laserwar8.jpg
Either one, they are identical.
These links were not working, maybe the site is tempor down. What do these boards look like? Is it the small board with the fuse and rectifer? If so I may have a spare for sale. Let me know
-
Nuggy and I have just about finished bringing a Secret Service back
from the dead. Looking for the 50 volt flipper power board used in
Williams system 11 games up to Fire!
http://www.pinrepair.com/sys11/sys9b.jpg
Or as used in DE Secret Service and Laser Wars
http://www.pinrepair.com/de/laserwar8.jpg
Either one, they are identical.
These links were not working, maybe the site is tempor down. What do these boards look like? Is it the small board with the fuse and rectifer? If so I may have a spare for sale. Let me know
Seem to be working for me - must be a browser thing. I think you have the right board in mind, luckily Craig (Wonder) very kindly sent one over for nothing! Pretty nice gesture!
-
[/quote]
Seem to be working for me - must be a browser thing. I think you have the right board in mind, luckily Craig (Wonder) very kindly sent one over for nothing! Pretty nice gesture!
[/quote]
Yes links are working now, must have just been down. Yes this is the board I have, but as you have one its obviously not required. Cheers Dean <..>