The Aussie Pinball Arcade
Aussie Pinball Forums => General Chat - Non Pinball/coin-opp Discussion => Topic started by: v8racefan on June 18, 2010, 02:58:48 PM
-
As the title says after many many months of dealing with local council (Gold Coast City Council) I finally have a development approval to construct my shed!!
The birth of the V8Supercar - Bundyrum pinball parlour has finally arrived ^^^
Will update this post with pics as this project develops.
-
Good stuff, Leon - Looking forward to the progress pictures ^^^
What size will it be ?
-
Thanks Nino
The size, well this has been one of the difficulties getting DA approval, I'm only on a 700m² block and have a large lowset house on the site, so I was limited to were I could build this shed. Then a few weeks ago the council advised me that I have a sewer main running along the rear boundary of my site, and there was NO way they would approve it if I built over this, and I have to be 4.5mtrs off the rear boundary in case this sewar main ever gets blocked!!
This effectively means I can only build upto 4.5mtrs off the rear boundary over entire width of my lot, and therefore I loose development of 90m² of my land!!! NOT HAPPY. ^.^
I have a 4m strip of land down one side of the house that is now my only option to build on so to answer your question my shed is going to be 3.0mtrs wide by 9.0mtrs long by 2.4 mtrs high (area 27.5m²).
This should be enough room to run a line of 7 - 8 pins on one side + 5 - 6 video games along the other 9mtr wall, with the Bundy bar situated at the end.
Would have loved to build bigger !!!, but never mind at least I'll have a my own area to house my coin-op collection.
-
Great news Leon llok forward to updates. Councils are a nightmare had a friend who wanted to build a bbq area with a woodedn deck and a roof. After 14 months he finally got approval for the roof but the deck was not allowed !@# He finally got it build and i shit you not its only about 2mt square. I just assumed it covered the whole back yard
-
Never ever had joy form councils....I for one believe thet we are over governed here in Australia, and councils need to justify there existance with these red tape issues.... ^.^
-
Just thought I'd post/upload a couple of pics of the shed progress.
Progress has been slow, so far I've dug out the slab and footpath out ready for boxing and road base. That's this weekends work, boxing + roadbase, then ready for the concret work. Just getting quotes now for the pouring/finishing the concrete slab. This slab needs to be 100% level for my pins, that's why I'm getting a expert to pour & finish.
-
Looking forward to the progress on your new games room good luck will it, will it be finished by xmas?
Peter
-
Thanks Peter,
Yep project will be completed by xmas, I've ordered a Titan shed and the wall frames & truses are all prefabed in 3m panels, makes installation quick & easy. ^^^
-
looks great so far and will be fantastic once finished
but you are likely going to need a bigger earth mover than the one in the photo
-
looks great so far and will be fantastic once finished
but you are likely going to need a bigger earth mover than the one in the photo
Thanks
%.% ha ha thanks for the coments re earth mover, kids and there toys... %.%
-
looks great so far and will be fantastic once finished
but you are likely going to need a bigger earth mover than the one in the photo
%.% %.%
GOLD !
Looking good Leon ^^^
-
Some more pics following a few hours work over the weekend, boxing 90% complete, roadbase down, and have just approved a cashie quote for the concrete supply & pour/finishing work, slab will be poured on saturday morning. ^^^
-
Good on ya for getting your shed Leon..
makes me laugh with council regulations... when i did my shed at eeeeeeeeeeeeex wifes place i too had a sewer pipe at the end of the garden and could not build within 4M of it.
But i also could not build within 1M of boundary fence on the side... i see youve managed to go right up to yours in the pic.
My shed had this bloody irritating strip of useless land down the side that i could just get a lawn mower up to cut back the bloody weeds. Complete waste of bloody land... and if you cant build near the bloody sewer why do you pay same rates as next door who have no friggin sewer and can build anything they want wherever they want?
Anyway... eeeeeeeeeeeeeeeeeeeeeeeeex wifes bloody problem now
-
nice mate
you can fit a few pins in there .........
-
Good on ya for getting your shed Leon..
makes me laugh with council regulations... when i did my shed at eeeeeeeeeeeeex wifes place i too had a sewer pipe at the end of the garden and could not build within 4M of it.
But i also could not build within 1M of boundary fence on the side... i see youve managed to go right up to yours in the pic.
My shed had this bloody irritating strip of useless land down the side that i could just get a lawn mower up to cut back the bloody weeds. Complete waste of bloody land... and if you cant build near the bloody sewer why do you pay same rates as next door who have no friggin sewer and can build anything they want wherever they want?
Anyway... eeeeeeeeeeeeeeeeeeeeeeeeex wifes bloody problem now
Thanks Gav, I've been wanting a shed for some time now, I'm glad to see the project underway.
I did manage to get approval for the shed to go along the fenceline with NO relaxation due to the shed being under 30m2.
-
nice mate
you can fit a few pins in there .........
Thanks mark
The shed should hold around 10 pins, 10 pins should be enough to keep the kids entertained + some vids as well. I'm looking to add another pin to my collection in 2010.
-
Hi Leon,
I was also caught out with a council sewer running through the back yard, was not highlighted in searches and is not deemed an easment, yet you cannot build near it ^&^
Anyway good luck with the shed, whereabouts on the gold coast are you? I,m at Runaway Bay.
Cheers
Dave
-
be up your way later this month or early next month
how far you think you be by then ?
10 pins , be a nice games room well done
mark
-
Hi Leon,
I was also caught out with a council sewer running through the back yard, was not highlighted in searches and is not deemed an easment, yet you cannot build near it ^&^
Anyway good luck with the shed, whereabouts on the gold coast are you? I,m at Runaway Bay.
Cheers
Dave
Yep bloody council sewer mains!!!!! I too loose 4.5mtrs across the rear of my lot!!!! this equates to 14m2 smaller shed !!!
-
be up your way later this month or early next month
how far you think you be by then ?
10 pins , be a nice games room well done
mark
Thanks mark,
I should have the frame up all going well maybe roof on, would be great to catch up for a few beers when you're on the gold coast next.
-
UPDATE A couple of progress pics, slab poured last weekend. I set a CHEVY emblem in the roller door rebate using an ceramic floor tile, this just adds to the V8 theme of the games room.
Time now to save some more $$$ to pay the balance owing on the shed kitset.
-
That's fing to be great Leon. And I love the chev emblem what a great idea
-
That's fing to be great Leon. And I love the chev emblem what a great idea
Thanks Daniel
Yep there's a few other chev emblems I've incorporated into different featurtes at my place.
-
Just a update on the shed progress...
Well the kitset was delivered this week, and I managed to finish the concrete path in between the rain!
Was going to start the build today, BUT its Raining again ^.^ here's a couple of pics
Just as well BATHURST is on today $#$
GO THE HOLDENS!!!!!!!!!!!!!!!!!!!!!!!