The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Mods => Custom Games => Topic started by: greatwichjohn on April 26, 2012, 08:11:28 AM
-
If anyone has access to a commercial inkjet printer for large objects, & wants to restore playfields there. You can follow my process which is now bullet proof! All you need is a art file to restore the playfield(s). All the info on my site & I will answer questions. Good way to do custom playfields. Here are Star Gazer restorations done today.
http://s36.photobucket.com/albums/e28/greatwichjohn/Star%20Gazer%20before%20finish%20clear%20coats/
http://greatpinball.com/services.html
-
Great work, well done!
-
awesome, thanks so much for sharing.
-
They look great John - all those hard years of experimenting look to be paying off!
-
Very nice John ! Patience is a virtue and it has paid off BIG TIME for you. Well done ^^^
-
Great job John ^^^
-
If you can get a good print shop to do custom art work for backglass like this also:
http://s36.photobucket.com/albums/e28/greatwichjohn/Star%20Gazer%20Backglass%20-%20Commercial%20%20Inkjet%20Printer/
-
Hi John
I have come across someone who has a large format printer that does print on wood up to 13mm. how would I get an art file for the star gazer to see if I can get my playfield done in Australia.
Thanks.
-
I might be wrong but doesnt John sell those playfields new and finished ready to install ?
If he was to just give out the artfile, he wouldnt be able to recoup his expenses over the years that he has spent perfecting his printing process and art file work which takes hundreds/thousands of hours.
Is that correct John ?
-
Great work John!! ^^^
-
I did contact John a while ago and he said they are not planning on producing them, only restoring them, If he was selling them ready to go I would be more than happy to purchase one from him. And he has stated if anyone has access to a commercial inkjet printer,so it is more an inquiry.