The Aussie Pinball Arcade
Aussie Pinball Forums => General Discussion => Non-pinball (other coin opp) => Topic started by: infinite1977 on July 17, 2012, 08:24:53 PM
-
Hi guys, I thought I would try and ask the question. I just purchased an Operation Thunder Arcade machine which has a faulty PCB. I am getting a colour ram error when I boot the machine up. Can anyone recommend somewhere or someone I can take the board to get it fixed. I am based in Melbourne, but I have no problem sending the board interstate if required.
-
Coin Replay
They in Melbourne in Mulgrave
Give Gunner a call, he good and helpful on 1800 333 350
-
Thanks for the recommendation
-
Here is a picture of the error message on the screen for anyone interested
-
Reseat all the inter board ribbon connectors and reseat all the IC's in sockets. Do this with the game off and report back ^^^
-
Reseat all the inter board ribbon connectors and reseat all the IC's in sockets. Do this with the game off and report back ^^^
I wil have a crack tonight and let you know
NiƱo I re-seated all the connections inside the cabinet. There was a cable that was not connected which leads to a switch labelled "Screen De-Gause" so I connected them. There is no error message visible on the screen now just a pink screen and small black screen in the top corner (almost like a pip)