cabinet flipper switches

[narf]

hey guys had a problem the other week with my BOP flippers where one wasnt feeling as good as the other. quick look at the EOS showed i had 2 different style of switches and one was highly worn. so ive replaced them. then while playing i found the flipper was sticking slightly, that turned out to be the coil was slightly loose and dropping down so the plunger was being held back with the weight of the lowered coil,fixed that

i later had a blown fuse that i attribute to the coil dropping and sticking the flipper. while i was sorting out why ive noticed my cabinet flipper switches look a bit pitted so thinking to swap those too (rest of the flippers are all new bar the coils atm)

so any direction on where to find some to suit a 91 williams machine

[Homepin]

Mark C is bound to have them

[Extra Ball]

I think these are the ones Narf, compare them to what's in your machine.

http://www.rtbb.com.au/catalog/product_info.php?products_id=1228&osCsid=aefaacc5d0239b5177cf4ae8f58cae3c

Dare say these could do the job as well: http://www.pinballspareparts.com.au/index.php?crn=233&rn=538&action=show_detail

sum1 with a BOP could confirm these though

[narf]

cheers greg the ones from greg look the same


will have to make the order up. im keeping her since the market has gone to shit atm