WTB blue sunburst pop bumper caps with plain centre

[ktm450]

I'm chasing some blue sunburst pop bumper caps with a plain centre for a Hankin Shark restoration, I will make the artwork that is on the plain part as I am obviously not going to find originals.
The only place I can find what I'm after is Pinball Resource, I have had a look at the local guys without luck.
Anyone have a set of 3 stashed away they don't need anymore? Or going to do a Pinball Resource order in the near future?

[Toads]

I searched for the blank red ones years ago for my howzat and at that time pinball resource was the only place I could find them then. If you need a scan of the center, let me know.

I'm chasing some blue sunburst pop bumper caps with a plain centre for a Hankin Shark restoration, I will make the artwork that is on the plain part as I am obviously not going to find originals.
The only place I can find what I'm after is Pinball Resource, I have had a look at the local guys without luck.
Anyone have a set of 3 stashed away they don't need anymore? Or going to do a Pinball Resource order in the near future?

[ktm450]

If you have a good scan that would be great  
Either upload here or I'll shoot you a pm with my email address.
Thanks heaps

[ddstoys]

I have that shark playfield if you need plastics or anything else

[ktm450]

Thanks very much mate, I didn't realise you had one, does it have the original bumper caps?
I have everything else, all plastics are good luckily

[ddstoys]

Can't remember ill look when I get home

[Mr Pinbologist]

I have the same dilemma at the moment.. i have a Hankin Shark in for repairs and i have been asked if i can find some bumper caps for it as it has non original ones on it  

[swinks]

another option is that they could be modelled and 3D resin printed for the see through look and printed at imaterialise though wouldn't be surprised if they are around the $12-$16 each.

[ddstoys]

I found you the flipper coil and I have two bumper caps but there badly yellowed yours if you want then if not Mitch can have them.

[ddstoys]

I found you the flipper coil and I have two bumper caps but there badly yellowed yours if you want then if not Mitch can have them.

[ktm450]

Thanks mate, I'll grab them if you don't need them, I can use them for sizing of vinyl decals then if Mitch wants them he can have them, or I can get an extra set of vinyl decals made up for Mitch

[swinks]

check this link out for old school pop bumper DIY repro paint job and a cool shirt as well
http://www.elephanteater.com

[ddstoys]

No worries Matt there here when ever you get around unless I'm out your way

[ktm450]

Thanks heaps mate