The Aussie Pinball Arcade

Aussie Pinball Forums => General Discussion => Topic started by: Pinballrocks on July 18, 2022, 11:48:48 PM

Title: Stern Dracula Pinball Machine J2 Connector
Post by: Pinballrocks on July 18, 2022, 11:48:48 PM

Hi All, If anyone owns a Stern Dracula Pinball could you please take a picture of the J2 Connector wiring harness. I have mixed up one of the wires and would appreciate any help.
Hopefully wires are all the same colours in these machines.


Thanks In advance. ^&^

Title: Re: Stern Dracula Pinball Machine J2 Connector
Post by: ddstoys on July 19, 2022, 12:20:15 AM

I’ll grab out the manual tomorrow and check on wire colors


Sent from my iPhone using Tapatalk

Title: Re: Stern Dracula Pinball Machine J2 Connector
Post by: ddstoys on July 19, 2022, 11:09:55 AM

Which boards J2?


Sent from my iPhone using Tapatalk

Title: Re: Stern Dracula Pinball Machine J2 Connector
Post by: ddstoys on July 19, 2022, 11:16:47 AM

Rectifier board
(https://uploads.tapatalk-cdn.com/20220719/b366c5163858c13d6fac65fd55369d31.jpg)
Lamp board
(https://uploads.tapatalk-cdn.com/20220719/96f15ab81c5f75fbed074faf08b3d5d4.jpg)
Solonoid board
(https://uploads.tapatalk-cdn.com/20220719/5780153f74226b1c471abfb42d917d2f.jpg)
(https://uploads.tapatalk-cdn.com/20220719/204243035c3675da289f1d8f621da131.jpg)
(https://uploads.tapatalk-cdn.com/20220719/a49a0c824c411bc373599cf56bba89dd.jpg)


Sent from my iPhone using Tapatalk

Title: Re: Stern Dracula Pinball Machine J2 Connector
Post by: Mr Pinbologist on July 20, 2022, 09:59:35 AM

Which board?? I have a Stern Dracula and can help with pics if still needed