The Aussie Pinball Arcade
Aussie Pinball Forums => Restorations => Topic started by: Pop Bumper Pete on March 18, 2018, 02:20:00 PM
-
Started off by just wanting to replace worn out ramps with new ones fitted with SS flaps
Once I removed the ramps I realized that there was not much more to an Attack From Mars. I had most of the parts, so I decided to go for a full playfield swap
Everything will be either cleaned (preferred), replaced (most parts for this game are available) , or rechromed
-
Remove everything from the top of the playfield
(https://i.imgur.com/tqjmBKe.jpg)
-
Remove all the mechanics from under the playfield.
I will remove the wiring harness later
Even with everything removed, it was still heavy and awkward to pull it out of the cabinet
(https://i.imgur.com/IImINSH.jpg)
-
Smaller parts in the tumbler
(https://i.imgur.com/ZlHsPcV.jpg)
-
Still love this game after many years. Is the replacement playfield new or restored Pete?
-
Still love this game after many years. Is the replacement playfield new or restored Pete?
Mirco repro
had it for years
been reading up on pinside, the dimples for the slingshots are slightly off, so I will have to be careful there
the strobe PC needs a little work, if I can find the part should be easy
my biggest problem is the guy I have used to do my chroming in the past has closed, they say there is another guy, but his place looked closed too
-
Great to see you getting some Pete time looking forward to updates
Sent from my iPhone using Tapatalk
-
I have an early run mirco in mine too. They are very nice, looking forward to seeing the progress.
-
Great to see you enjoying pins again Pete. AFM is a simple layout, yet addictive. They look AMAZING restored, so I will be following with interest.