The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: silverball on February 22, 2009, 03:41:21 PM
-
What are the recommended substitutes for a Hankin Empire Strikes Back flipper coil? Have a mate who has one with modified Bally coils(havent seen it yet) and are apparently very weak. He wants to change them regardless of any other mechanical/coil sleeve issue. Thanks.
-
What are the recommended substitutes for a Hankin Empire Strikes Back flipper coil? Have a mate who has one with modified Bally coils(havent seen it yet) and are apparently very weak. He wants to change them regardless of any other mechanical/coil sleeve issue. Thanks.
I've seen Bally and Gottlieb coils in Hankins, and Hankin coils in Ballys.
Hankin did use Gottlieb parts / assemblies in games, so you might be able to use a "A-17875" as a substitute. Keep in mind I've never had to change a Hankin coil - I have a Hankin "ES 222" coil - which I THINK is the right coil - not sure if it is good.
The best thing to do is check the resistance of an existing coil - that is not weak, and then you can choose between ;
GTB - 17875 (2.8/40 ohms)
Bally - AQ 25/2500 34/4500
or if my ES 222 is good (and the right one) you can have that
-
Yeah, the Gottlieb coils mentioned by Nino are the go. Do **not** use the stronger Gottlieb 20095's - those targets in the centre will be minced in minutes.
-
I have a few Hankins coils too
check which one you need and let me know
mark
-
Great response guys, I will have to go and check his machine out for myself and then decide which way we go.
Dave.
-
have found the hankin , and other odd coils and will list them soon on ebay if they are still needed
mark
-
Gave him your details.
-
Hankin coils in my Elektra, seems they are interchangable with Bally?
-
Gave him your details.
thanks for that
I have found A few more after sorting stuff out , so thought I list them as a batch on ebay with a few other mixed lots of old parts
mark
-
Hankin coils in my Elektra, seems they are interchangable with Bally?
yea mate we see bally and williams coils in hankins all the time , mind you we see them in sterns too
some of the coils I have seen in pins over the year ^&^
-
Hankin coils in my Elektra, seems they are interchangable with Bally?
That's right Greg - I've seen them in a few different machines. There was one in my old Spacies and in a Genie !
As long as it works - You will be ok !