Aussie Pinball Forums > Restorations
How to touch this playfield up?
Marty Machine:
Since the colour would be old & faded, you would colour match as close as possible (use a pantone chart) and then i'd lean towards redoing the entire colour area around the bumpers, so you're adding a complete fresh layer of colour, rather than trying to match the original 1/2 with your new colour....then go for the coating/film over the lot etc etc.
Just my 20c &&
MM.
humpalot:
Have a look at the hi hand playfield that I done, it will show what to use for the black area's ^^^
illawarra_steelers:
Thanks guys,
Appreciate all your advice.....was hoping Gav would chime in &&
Gav did you want this job? #@#
Strangeways:
--- Quote from: illawarra_steelers on March 19, 2009, 04:32:41 PM ---Thanks guys,
Appreciate all your advice.....was hoping Gav would chime in &&
Gav did you want this job? #@#
--- End quote ---
I was going to say - Gav will go it - But I have a feeling he is trapped behind all his restoration work and can't get to his PC
%.%
ajlaird:
--- Quote from: humpalot on March 19, 2009, 09:47:06 AM ---Have a look at the hi hand playfield that I done, it will show what to use for the black area's ^^^
--- End quote ---
Ah, yes, the Rapidograph ink pens - I've already mentioned that in another recent thread.
Navigation
[0] Message Index
[*] Previous page
Go to full version