Author Topic: Replacing Sega "Jumbo" DMD  (Read 2992 times)

0 Members and 1 Guest are viewing this topic.

Offline Steevsee

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Brisbane
Re: Replacing Sega "Jumbo" DMD
« Reply #30 on: March 16, 2013, 09:52:15 AM »
Maybe you also have dodgy capacitor.

Try swapping the connections on the big blue capacitors.  So swap the black and purple wires from the right side cap to the left side and put the ones that were on the left onto the right.
You may already know that these caps are polarized - black wire must go to negative and purple wire to positive (which is marked on the top of the cap).

Try testing the voltages again(DC) once the wires are swapped and let us know result.