Post 3
I then drilled 4 strategic 1.5mm holes in the cardboard type shield that surrounds the lagoon see through panel and then tied the Creature into place with fishing line to what I thought would look ok. I then fastened the lamp from the back of the cabinet to the hologram holder in the centre and directed the lamp towards his crest area. I soldered in the wires from the original light supply via the Jaycar wires.
I purchased a green #89 LED flasher lamp from PSPA for $6 and installed it into place.
below photos show the creature and lamp fastened into place, and a screen shot of the globe that I used.
