The Aussie Pinball Arcade

Aussie Pinball Forums => General Discussion => General Pinball Discussion => Topic started by: cwispy on February 10, 2022, 03:20:28 AM

Title: WPC Dot Matrix Controller Board Reproduction
Post by: cwispy on February 10, 2022, 03:20:28 AM

Hi,


Thought that some here might be interested in the new reproduction WPC Dot Matrix Controller Board which I have made and am selling through my ebay account (https://www.ebay.com.au/usr/2000cn?_trksid=p2047675.m3561.l2559)


These boards have been made from the original circuit the silk screen shows what the components are in the event that something ever goes wrong and they need to be repaired. A couple of improvements have been made over the original design such as 10W resistors, larger heatsinks for the transistors and spacing the components out allowing better air flow.

Title: Re: WPC Dot Matrix Controller Board Reproduction
Post by: Strangeways on February 22, 2022, 01:29:19 PM

The original PCBs have thermal damage and are almost always beyond repair. This is better than a daughter board. Nice job !