The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: richierich85 on February 03, 2018, 07:58:28 PM
-
hi all.
new to the world of pinballs and i ended up buying my first machine a few months back and as being an x files fan i decided to buy an x files machine. Anyways i started my own restoration, clean up, re- rubber and trouble shooting some playfield light issues all inwhich i have sorted out myself with abit of reading and testing but as a newbie im not to confident to muck around with it too much. im having trouble with my flashers as all are not working, i have change the fuse tested cable runs and i have come to the conclusion i feel its at the main driver board not getting power to the "flasher" terminal block... any advice on where or what i should be looking at next? any information would be great.
cheers richie
-
First thing to do is to download the manual from ipdb and follow the circuit to the flashers. When testing flashers, is the door open or closed ? I can't remember 100%, but do Segas have safety switch on the door disabling coils and flashers ?
Silly question time - are these #89 or #906 flashers ?