The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Handy hints and tips => Topic started by: robm on April 14, 2009, 07:05:37 PM
-
Just an idea i thought of (probably not new) while cleaning up my Indiana Jones.
Put a hex screw driver bit in your drill backwards (so there is more of the hex for the sleeve to grip onto).
Put some novus on a rag
Spin to Win
They come up pretty good afterwards
-
Great tip,
I use a similar method but with wet and dry (with windex) and also polish bolt heads with some scotch brite pads..
Makes it very easy!!
-
I use this mothod for polishing my shooter Rod knobs come up great