Author Topic: Bally Fathom Restoration - Number Two  (Read 8280 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Bally Fathom Restoration - Number Two
« on: March 03, 2013, 12:30:15 PM »
Nice start Nino, I'm sure it'll come up every bit as good as your other restorations. I'm looking forward to the updates.  *%*
I have a question though. The disconnected braid wire sitting in the bottom left hand corner of you cabinet, what does it connect to? The reason I ask is that my Flash Gordon has a loose braid wire in exactly the same place. The bottoms not falling out of mine but other than that, your picture could have been a photo of mine.

The ground braid on the rear right hand side is meant to connect to the ground braid in the head. You will find a screw on a horizontal section of the head. If the ground braid is not connected, you can experience strange issues, so make sure it is connected !
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia