The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: MartyJ on May 03, 2009, 09:26:28 PM

Title: CEN-U45 or NTE272
Post by: MartyJ on May 03, 2009, 09:26:28 PM

Hey guys,

I'm chasing if anyone locally has 5 CEN-U45s or NTE272's.

Rockby's has two NTE's but I think RS are charging $50+ per one.   :lol

Thanks

Title: Re: CEN-U45 or NTE272
Post by: pinnies4me on May 03, 2009, 10:49:57 PM

Happy to help Marty, if you can replace them for me next time you order parts from someone who has them (as I've only got six or so spares). If so, drop me a PM with your snail mail address and I'll shoot them over.

Title: Re: CEN-U45 or NTE272
Post by: MartyJ on May 04, 2009, 08:06:16 AM

Great offer!  Thankyou..

Nino put me onto a mob O/S (Big-Daddy) whom I didn't realise stocked many of these hard to find components for Gottliebs!.  Thankfully they were not charging $40+ postage so I've ordered some which should be here in 3 weeks.  Machine's not going anywhere so I can wait for those.

Thanks again

Title: Re: CEN-U45 or NTE272
Post by: pinnies4me on May 04, 2009, 10:16:29 AM

Good place BigDaddy, that's where I grab a lot of this stuff from - the pop bumper driver rebuild kits are handy, and they have the CPU to Driver interconnectors too that save re-pinning those, good place.

Anyway, if you don't want to wait offer is still there.