The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Handy hints and tips => Topic started by: robm on April 14, 2009, 07:05:37 PM

Title: Polishing post sleeves
Post by: robm on April 14, 2009, 07:05:37 PM

Just an idea i thought of (probably not new) while cleaning up my Indiana Jones.

Put a hex screw driver bit in your drill backwards (so there is more of the hex for the sleeve to grip onto).

Put some novus on a rag

Spin to Win

They come up pretty good afterwards

Title: Re: Polishing post sleeves
Post by: MartyJ on April 14, 2009, 07:09:15 PM

Great tip,

I use a similar method but with wet and dry (with windex) and also polish bolt heads with some scotch brite pads..

Makes it very easy!!

Title: Re: Polishing post sleeves
Post by: ddstoys on April 14, 2009, 07:10:14 PM

I use this mothod for polishing my shooter Rod knobs come up great