test batch of 6 update
- tops are painted and curing so decals on soon
- laser base plates should be in tomorrow
- harnesses finished
- writing up a install manual
- tooling up with a custom 12 vdc tester to test the every wiring harness, inverter and el wire kit - see pics below
12vdc tester
my unit will have a plug in power pack connected to the appropriate pins so instead of plugging every kit to my back box circuit board I can plug up to 3 units at a time into the test box and test for 15 minutes each - QA testing before despatch. It will also be good to experiment and compare el wire inverters and different glow intensities or have 3 units with different coloured el wire plugged in at the same time.
this box will be available at Shapeways soon if anyone wants to create there own plug tester for mods etc - you will just need the box and 3 z connectors (available at Pinball Life). In addition you can mix it up and you could have one plug for 5 vdc testing the others for 12 vdc testing.
