The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Pinballs wanted => Topic started by: PinPal on January 06, 2019, 07:17:27 PM
-
Am in need of a right hand side Flipper assembly plate for the mini flipper of my Bally Flash Gordon.
Need the part number and if I can get one in Australia rather than order from overseas.
Any help be appreciated,,
Pinpal
-
I might have a spare one. I’m away until next week, if you don’t have any luck in the meantime I’ll check when I get home.
-
That woud be great, mine has issue's and a spare one will get me out of trouble.
Many thanks,,
Pinpal....
-
That woud be great, mine has issue's and a spare one will get me out of trouble.
Many thanks,,
Pinpal....
No worries, I’m back Saturday so I’ll let you know then.
-
I found one, it’s the opposite of the one your looking for but as you probably know they’re the same with the same holes only The holes are only threaded on one side. I think I have the right tap at work, I should be able to thread it tomorrow and send it to you if you’d like.
-
Hi Crashramp,
Think that might work, any chance you can take a photo and p.m. it to me Ide like to have a look,, hope thats ok...
Many thanks,,
Pinpal...
-
Hi Crashramp,
Think that might work, any chance you can take a photo and p.m. it to me Ide like to have a look,, hope thats ok...
Many thanks,,
Pinpal...
No problem, can do. ^^^