Aussie Pinball Forums > Pinball Training 101

GOTTLIEB SCORE REEL REBUILDING (Noobs take photos before you start)

(1/5) > >>

ddstoys:
Well there is a quick lets get this thing going so i can have a game method and a lets make this thing work for a long time im going to try cover both in this one thread lets see how we go.

Just letting any Noobs know that this looks easy nicely laid out on a table but remember when you do this there is a good chance its hanging out the back of your machine by the wires so it isnt going to behave how you want it to. Dont be scared but You have bee warned.

Step 1.  Slide score Reel from backbox

ddstoys:
Step 2  Remove the PCB by undoing the C clip and spring washer (be carefull it doesn't shoot off) and the 2 screws holding the PCB on and fald it
             backwards becareful not to break any wires if you do take note where they came from

ddstoys:
THIS IS THE QUICK JUST WANT TO HAVE A GAME WAY TO FIX IT OR THE IM A SCARED LITTLE GIRL WAY  %.%
If you want to do it properly skip to the next post

1. Carefully remove the score reel only not the cog below it.
2. From here take a toothbrush dip it in metho and clean the place with the arrows as best you can try get into where the
    metals rub together.
3. Put a tiny drop of machine oil where the two metals rub where the arrows are
4. Clean PCB with metho then the Green jexpad thingy (see step further on slack ass :lol)
5. Put it back together in reverse of how you pulled it apart.

Now enjoy your machine but be prepared to do this regularly.

ddstoys:
WELCOME BACK TO THE KEEN PEOPLE WHO WANT TO DO IT PROPERLY

Step 3 Remove the score reel by gently lifting straight up (Might need a bit of a Jiggle)

Step 4 Remove the Cog bit and the spring

ddstoys:
Step 5  Remove one screw from the switch stack and swing the stack clear ( or remove it completely but the stack will fall apart)

Step 6 Remove the coil bracket, Plunger and Coil from the Mech ( Fidgity little bugger but does come out)

Step 7 Remove the Spring from Slide Plate and remove it from the base

Navigation

[0] Message Index

[#] Next page