The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Handy hints and tips => Topic started by: pinnies4me on May 24, 2010, 07:31:02 PM
-
Here's a mod by Steve Charland (notable Gottlieb enthusiast) to convert the lower illumination from the awkward 24 volt #313 lamps to the common #44/47 lamps. Super easy, I'm doing it to my game tonight as it regularly blows the #313's anyway.
http://www.system-80.com/Hacks/BlackHole-24V-to-6VDC-Conversion.htm
-
Looking forward to the HH mod ^^^
-
I changed my Haunted House when i restored it, followed the guide on Clays site, its plenty bright enough with the 44/47s installed.
Ian
-
I changed my Haunted House when i restored it, followed the guide on Clays site, its plenty bright enough with the 44/47s installed.
Ian
Been a while since I read Clay's sys80 guide - so I'll keep that in mind when I start mine ^^^
-
yes Strangeways its hard to keep track of all these tips and mods, so its good to be reminded every now and then, thanks to pinnies for the black hole guide ^^^ i dont know if its the same as HH.
Ian