The Aussie Pinball Arcade
Aussie Pinball Forums => Archived Threads => Homepin => Topic started by: Homepin on October 16, 2014, 09:12:24 PM
-
This simple support plate is laser cut from 0.7mm stainless steel sheet and bolts to the back of the Supercharger ramp entrance sign in minutes. It will prevent the plastic sign from breaking and also support an already broken piece.
(http://www.homepin.com/pics/getawaysign1.jpg)
(http://www.homepin.com/pics/getawaysign2.jpg)
(http://www.homepin.com/pics/getawaysign3.jpg)
Available here:
http://www.homepin.com/getawaybracket.html
-
nice work,as usual ^^^
-
But I already made my own....
Good job!
Simon
-
Hmmm, looks familiar !@#
http://aussiepinball.com/index.php?topic=3653.msg54964#msg54964 (http://aussiepinball.com/index.php?topic=3653.msg54964#msg54964)
-
Hmmm, looks familiar !@#
http://aussiepinball.com/index.php?topic=3653.msg54964#msg54964 (http://aussiepinball.com/index.php?topic=3653.msg54964#msg54964)
Great minds....and all that......I actually have had the plastic made and I am currenty checking to see how I stand with copyright - it has no artwork (as such) so we will see - just the main, larger piece not the front plastic.
-
They are pretty rare, I remember the last time NOS plastics popped up they were around $40 each, crazy for a plain piece of plastic.
-
They are pretty rare, I remember the last time NOS plastics popped up they were around $40 each, crazy for a plain piece of plastic.
The one shown in the third picture above is my own recreation and hand cut from the sheet after screen printing. It is actually a lot more complex than it might first appear being a four colour screen print - orange, red, black and white.
-
Will have one for my Getaway ^^^
Payment sent..
Pinpal....