The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: Brett.Nicole on October 11, 2018, 12:04:11 PM
-
We are VERY new to pinball ownership and not even sure if this is in the correct category.
We bought a 1981 Williams Jungle Lord, seems mostly complete, but is untested. It was an import from Europe, bought through a friend who got it from a guy who sells them in Victoria.
Anyway, we are testing coils and switches and chasing down the wiring. We found a manual on IPDB, but are not sure on how to read the wiring diagrams. !@#
The problem is our coin door, has all its stuff missing, and the wires that go to the adv., auto up/down, h s buttons are not attached (don't know the name of the bit). We have found what colour wire is what, but where do they solder to? ^&^
Would anyone know how its meant to wire it up?
Any help is greatly appreciated.
Thanks
-
Picture does not load.
The schematics should have the wiring diagram - I will have a look later today.
-
not sure what I'm doing wrong
but thanks
EDIT: hopefully photo has loaded
-
I'm looking at doing a pin repair road trip in the next week or so up your way (Nambucca Heads and Arakoon)
I might be able to help out if you need it, I'm based in Wauchope ... just down the road from you :lol
Send me a PM if you need assistance
Cheers ..Mitch
-
PM sent, thanks