The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: beaky on November 03, 2010, 08:26:26 PM
-
I am Trying to find a wire for the gate on the top left ramp.
Or the wire to make one.
the pictures show which one.
Thanks in advance.
-
Maybe a bicycle wheel spoke for the wire?
-
Andrew
If its the same gauge wire as the outlane guide rails then the stainless wire that welders use for tig welding is perfect.
Good luck
-
thanks guys.
one of the suppliers used to sell a 'bend your own' length of gate wire, but i can't find who sold it.
-
You can also use piano wire - if you have a music shop local !
-
Andy, remember we made the exact same thing for GODZILLA using thin gauge coathanger wire.
That famous QLD moonshine has taken your memory away ! **)