The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: beaky on March 27, 2012, 11:10:49 PM

Title: Wanted: Large dmd to suit Sega Bay watch, Mary Shelley's Frankenstein
Post by: beaky on March 27, 2012, 11:10:49 PM

Hi guys
does any one have a working Large DMD display 192 X 64 to suit PART No. 520-5075-00 : Maverick, Batman Forever, Frankenstein and Baywatch that they would be willing to sell?

If not does anyone know where to get these in Aust?

thanks

Title: Re: Wanted: Large dmd to suit Sega Bay watch, Mary Shelley's Frankenstein
Post by: Pintoxicated on March 27, 2012, 11:20:38 PM

Not sure if anyone in Oz has them, last time I looked there wasn't.

I ended up buying one from MAD Amusements (I think it was) some time ago, they worked out to be the cheapest.  Still ended up well over $500 at the time though, the dollar was around 80 something cents at the time.

Title: Re: Wanted: Large dmd to suit Sega Bay watch, Mary Shelley's Frankenstein
Post by: beaky on March 27, 2012, 11:58:25 PM

thanks mate, they do still have them in stock.

I will see if i can fix the one i have here as it is a power supply fault but i am not sure if the glass is drawing to much current or not.

If i can get one in aus even if it is second hand it will be a bonus

Title: Re: Wanted: Large dmd to suit Sega Bay watch, Mary Shelley's Frankenstein
Post by: Caveoftreasures on March 28, 2012, 02:47:30 AM

Andy, Mark C did have some in stock a while back.

There is also a upgrade cable that helps these displays alot that Marco Spec sells for ap $20. It can overcome intermittent or non working displays. Marco Spec also sells the displays as well.

Title: Re: Wanted: Large dmd to suit Sega Bay watch, Mary Shelley's Frankenstein
Post by: beaky on March 28, 2012, 10:38:38 AM

Quote from: Caveoftreasures on March 28, 2012, 02:47:30 AM

Andy, Mark C did have some in stock a while back.

There is also a upgrade cable that helps these displays alot that Marco Spec sells for ap $20. It can overcome intermittent or non working displays. Marco Spec also sells the displays as well.

Cheers mate but Mark has sold out of them. I have bench tested it out of the machine and it is dead. I will need to confirm weather it is the glass or a component on the pcb. if it is a component that is available then I may be able to repair it