The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: TSPP on June 19, 2010, 10:14:01 PM
-
Am after the red star posts for my Strikes and Spares. I have looked at the manual but can't find a part number. Can anyone help with this !@# want to make sure i get the right ones.
-
The correct ones have the hoops around them i got mine from PBR but check the sponsor they may have them in now ^^^
C951-1 is the PBR part number
-
yeah, but there are still many to choose from are there not !@# do you have a part number to pass on for me please?
-
Mate are they "Star" shaped ones or the "ribbed" ones . My Bally SM$M has the 1 1/8" ribbed ones . Local guys have the 1" ones and some longer ones (can't think of the exact length ATM) .
Only place I found I could get the 1 1/8" ones was Marco :
http://www.marcospecialties.com/product.asp?ic=C%2D952%2D7
-
cheers for the photo, looked on marco's and so many different ones.
-
I have not looked on Marcos for years after the last experience they will be a final option for me *%*
-
Best bet would be to take one out of the S&S and measure the overall length of it accurately .
If they are the ribbed posts you are after I think Marco only has a couple of different ones . From the Home page click on "Parts by Category" , then "Playfield Parts" , then "Posts/Spacers/Standoffs - Plastic" .... It should bring up 6 pages of items ... Page 2 has Blue 1 1/8" ribbed posts (#C-952-4) , Page 5 has 1 1/8" Red Ribbed posts (#C-952-7) and 1" Red Ribbed posts (#C-951-7) .
Depends on what length was used on Strikes and Spares .
If you need 1" long ones then Greg has these :
http://www.rtbb.com.au/catalog/product_info.php?cPath=40_125_42_162&products_id=785&osCsid=737b6548b57ba55d49d80c419e107355
He also has these which I think are 1 3/16" :
http://www.rtbb.com.au/catalog/product_info.php?cPath=40_125_42_162&products_id=782&osCsid=737b6548b57ba55d49d80c419e107355
-
Thanx Cruiserman, definatley good tip, will do, want to strip and clean the playfield anyway.
While i have everyones attention, my plastics seem to be loose ie: they move a lot. Is there supposed to be washers under the plastics? I have tightened the "nuts" as much as they go, am i missing something?
-
I got the long blue ones from Greg RTBB for my 1980 Xenon and was very happy with them.
Ian