These are the 3 main areas needing attention.
The 250,000 insert is slightly raised, not enough to catch your finger nail but enough to feel the bump. With the playfield being 2 pac clear coated, do I need to fix this? or will the clear coat mask the issue.
If I have to fix, prefer not to remove the insert. Can I apply pressure from the top with a clamp and heat up the bottom? Hopefully re-seating the insert and then apply an amount of glue to re-fix.
The CPU area. Red insert must come out and be re-levelled. Then I will air brush the black areas.
The pop bumpers. Do I need to remove the 3 bolts going thru the playfield for each of the bumpers. Or just leave as is, repair the art work and clear over the top?
More pictures to come when I attack the playfield with the air brush.
