The Aussie Pinball Arcade

Aussie Pinball Forums => Archived Threads => Homepin => Topic started by: Homepin on May 17, 2013, 07:12:25 AM

Title: AM Strobe Power Supply & lamp PCBs - Tester required
Post by: Homepin on May 17, 2013, 07:12:25 AM

I have had this finished for some time now but the "tester" I had lined up has pulled his machine apart and it won't be back together for some time.

I am looking for an owner who is prepared to fit these boards to his machine and confirm that, firstly, the mounting holes all line up exactly as per the original and there is adequate clearance depth wise and also that the boards work correctly in the game (always handy  %.%).

Ideally this testing needs to be done within a couple of weeks. I will supply the full set (as pictured) and pay express post no charge and the boards are the testers to keep if all is OK.

There is no chance that this board will damage anything in your machine however there is always the risk of disturbing something when swapping anything around of course.

Any takers? Please PM me.
 

(http://www.homepin.com/pics/afmstrobe1.jpg)


(http://www.homepin.com/pics/afmstrobe2.jpg)

Title: Re: AM Strobe Power Supply & lamp PCBs - Tester required
Post by: Pinballer on May 17, 2013, 07:56:30 AM

I can do it for you Mike.

Title: Re: AM Strobe Power Supply & lamp PCBs - Tester required
Post by: Homepin on May 17, 2013, 08:09:23 AM

Thanks Stu. I will get it bundled up and away ASAP.

Quote from: Pinballer on May 17, 2013, 07:56:30 AM

I can do it for you Mike.

Title: Re: AM Strobe Power Supply & lamp PCBs - Tester required
Post by: chillie on May 17, 2013, 03:11:33 PM

If you end up needing a second tester just yell out as I would be happy to assist.

Chris