The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: deadlydave on December 03, 2009, 10:59:30 PM
-
Hi all,
With regard to williams sys 6 driver board, can I "steal" a spare solenoid transistor driver to replace the one I've blown, and leave spares posistion un-populated for now?
Had one pop bumper switch stick, which took out the solenoids fuse and the pop bumper driver transistor.
Cheers
Dave
-
Simple answer... yes... not all are used so youll have some spares on the board
-
Cheers for the reply Retropin, I ended up getting one from jaycar, but handy to know you can pinch a spare if needed.
Cheers
Dave