The Aussie Pinball Arcade
Aussie Pinball Forums => General Discussion => Non-pinball (other coin opp) => Topic started by: Pinballrocks on December 05, 2010, 08:53:33 AM
-
Hi All,
Hoping someone can give me some advice. I recently bought a 1980 Moon Alien 2 cocktail table and have noticed that the graphics for the spaceship that shoots is out of alignment. All other graphics are fine.
It looks like there is a verticle line flashing in the centre of the ship when you move from left to right and a second white line can be seen on the right hand side of the shipapproximately 10mm away. Could anyone point me in the right direction? eg adjustment? Any help would be appreciated. !@#
Thanks Paul
-
Check the 5VDC on the board
Reseat the EPROMS
-
Thanks mate.
I will try that when i get home.
The machine is also missing a Black 1 inch joystick knob ( Very Small ) and some buttons. Im trying to keep it as
original as possible. Does anyone sell second hand or do repros of that size?
Thanks again for your help. Paul
-
Thanks mate.
I will try that when i get home.
The machine is also missing a Black 1 inch joystick knob ( Very Small ) and some buttons. Im trying to keep it as
original as possible. Does anyone sell second hand or do repros of that size?
Thanks again for your help. Paul
Post a photo - I have plenty of used spare joysticks and arcade parts.
-
Thats Great. Thanks again
I will get a photo posted. ASAP
-
Here are the photos, first two are on either side of cabinet, one with the joystick and other without the joystick, and the white buttons are next to joystick, as you can see the top section has broken off one one, and the whole shell or shroom of the other has completely broken, so need 2 replacement white buttons and 1 joystick.
Thanks again.
cheers
-
Hi Nino, Just confirming the thread size for the black joystick knob. I need the knob to screw onto a 5mm threaded lever. Have you had any luck finding buttons? Thanks again for your help mate. Regards Paul
-
Melbourne airport had these all over the place - like 20 years back.
-
Melbourne airport Really..... Im hoping someone can find one in an old cupboard..lol
-
Knobs and buttons sent ^^^
-
I have recieved the package. I can use the knobs and some of the buttons. The smallest red button you sent me
fits perfectly into one of the existing button shrouds. I will glue it in.
I think i can grind down one of the other ones
Please send me your account details so i can fix you up.
Thanks again mate. ^^^
-
Good to hear Paul - Sorry I didn't send them earlier ! Glad to help out another member.
-
Wow nice machine there I'd love a cocktail in my games room-years ago they where everywhere you just fell over them now there hard to find and NOT cheap, Well done Nino for helping out as you have with my requests many times and its much appreciated.
Peter