The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: tonyt on November 19, 2008, 12:47:56 AM
-
I have a Rocky pinball that I would like some assistance please in firing up. Have connected things as best I can. The machine was recently purchased and has been in storage for a while. Obviously don't expect this to be done for nothing.
Thanks,
Tony
-
Try Mark at Southern Star Electronics - 0418822207.
What kind of problems are you having?
-
Tony - If you like - List your concerns here and we can assist where possible !
Here's some light reading to begin with ;
http://www.pinrepair.com/sys80/index.htm
-
Thanks guys,
Will love to sort out all the problems myself. Thanks for that link Nino, will go through it and see if I can work it out. Will post if I get stuck.
Received my order today from Pinball resource for the Rocky - Rubber ring kit, drop targets etc. - just got to get the machine going now.
I have some lights but no sound and displays. Are you able to email me please Nino a photo of the backbox wiring on the Rocky in order that I can compare mine that I have done it correctly.
Regards,
Tony
-
Thanks guys,
Will love to sort out all the problems myself. Thanks for that link Nino, will go through it and see if I can work it out. Will post if I get stuck.
Received my order today from Pinball resource for the Rocky - Rubber ring kit, drop targets etc. - just got to get the machine going now.
I have some lights but no sound and displays. Are you able to email me please Nino a photo of the backbox wiring on the Rocky in order that I can compare mine that I have done it correctly.
Regards,
Tony
Tony - check the Restore thread here ;
http://aussiepinball.com/index.php?topic=99.15
Keep in mind the boards are not in the machine. So the Displays are connected on the RHS of the CPU board.
First think I would check are the fuses. No Displays mean no 60V from the Powersupply