The Aussie Pinball Arcade

Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: pocketscience on February 09, 2015, 11:49:44 PM

Title: Wanted: Data East flipper button assembly
Post by: pocketscience on February 09, 2015, 11:49:44 PM

Hi all,

My DE Checkpoint has mismatched flipper buttons so I'm looking for what I believe is the original assembly - see attached pic. The switch itself isn't an issue as I already have those, but I need the bracket itself including the spring plate. If you have one please drop me a PM.

(http://www.pocketscience.com.au/arcade/de_flipper_button_assembly.jpg)

Cheers,

Title: Re: Wanted: Data East flipper button assembly
Post by: andtan on February 10, 2015, 07:44:52 AM

I believe that this is the bracket you're after:

http://bayareaamusements.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=FP-535-5866-00

Not sure about the spring plate though.

Cheers,

Andy

Title: Re: Wanted: Data East flipper button assembly
Post by: ddstoys on February 10, 2015, 08:17:18 AM

I'm sure I have these still in a bag NOS I'll try find them tonight

Title: Re: Wanted: Data East flipper button assembly
Post by: pocketscience on February 10, 2015, 09:36:45 AM

Thanks for the replies guys - Andy I was at BAA last week and yeah they don't have the spring plate attached unfortunately. Dan if you have one or two that would be super convenient!  ^^^