Gottlieb Coin Door

[millsy]

Yes more questions from Millsy 
Ist question : My coin door has the hinge screws missing,hinge still attached to the cabinet but there does not seem to be threads on coin hinge side to srew in - threaded plate missing maybe ?(Cant check as I have just ordered parts book) - Hope this makes sense.
2nd question : The cabinet has been repainted completely different to original (Looks crap) -Hopefully original artwork is under paint so i can scan,but not sure if there is a stripper available that will leave the original artwork there.
Also after a backglass.
By the way,the machine is a 1973 Gottlieb Jumping Jack.
Thanks kev.

[Strangeways]

Need pix, Millsy.

From memory, the door is screwed onto a hinge nut strip using metal screws.

"Hinge" - Part number B-7196
"Hinge nut strip" Part number A-7181 (you are missing this - answer to Q1)

Then use woodscrews to mount the door.

Try Citrus Strip from Bunnings for question 2.

[The pinballist formally known as Dean Morgan]

Do you have a backglass at all?

I can put you onto a guy in Vic with one but it is only probably 6/7 out of 10 condition wise.  Better then nothing if you dont have one?  But if you have one prob not much use to you.

[millsy]

Thanks Dean,
The backglass i have i would rate 5/10 but im pretty fussy,not sure if im underating - I am in Tassie at moment but not back till Tues,so I will take a good photo of the one i have & will post it to get a different opinion of its rating by everyone on the forum.
Kev

[millsy]

Hi all,
Not too good at rating Backglasses. What would you rate my current BG ?
Millsy

[Strangeways]

It is not that bad, Kev. I'd probably seal it from further deterioration, and look at the possibility of touching it up.

The area to improve is around the score windows.

[ddstoys]

GDay
          Im sure i have one of those nut strips that the door bolts to let me know if you want it and ill have a search. Also have many other pars for this machine as i wrecked one not long ago
 DANIEL
       

[millsy]

Hi Daniel,
Will PM you
Thanks kev

[chris288]

Hey Millsy,
If you wanna new Jumping Jack BG then Pinbaal Pal / Shay arcade Group have just released one.
Its USD$295 plus shipping obviously.
 With the way the Aussie $ is at present its probably gonna cost about $600 - $700 by the time you get it here though.

http://www.pinballpal.com/shay/#130-0050

[markc]

i will be listed a few old cabinets  in the next few weeks  and have a few spare doors too
all will be listed as i can get down from the racks . I am sure I have  a door if you need one


mark

[ddstoys]

Hey mark
          I think i have hims sorted for parts. What i dont have now will come from my next project once farmer joe gets some free time????  But list them cabs the will look good on the wall lol

[markc]

Hey mark
          I think i have hims sorted for parts. What i dont have now will come from my next project once farmer joe gets some free time????  But list them cabs the will look good on the wall lol

LOL  mate you really had a few last night didnt you 

[ddstoys]

Yeah about 10 cans and half a bottle lol

[markc]

never have guessed 

family posts and  your email was even better   .....

[ddstoys]

SHit dont remember an email lmfao.  I need an interlock on my computer lol