Author Topic: Pinball 2000 power \ driver board fault fiding & mistakes in schematics  (Read 2888 times)

0 Members and 1 Guest are viewing this topic.

Marty Machine

  • Guest
  • Trade Count: (0)
Re: mistakes in Pinball 2000 schematics
« on: June 16, 2011, 11:19:31 PM »
I managed to use an old amiga computer monitor for a test monitor. It's not good enough to play a game on but it does do the job.
I will need to sit a mirror in front of it so the image is not mirrored.
....or you could swap the Horizontal-Yoke wires on the monitor neck, to do the mirror-flip, or even put the wires thru a switch so you can revert to using the monitor normally for anything else ;-)

MM