The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: Wotto on February 14, 2009, 12:53:43 PM
-
Hey all,
Anyone have one Gottlieb drop target lying around.
To suit Elm St pinball.
Doesnt have to be new.
Cheers
wotto
-
Wotto if you've got a pic send it to me... Is it the same as one on a System 80 ?
If so i have plenty...
-
I only have the top half- will send a pic tomorrow and see if it looks the same up top ( will measure it too )
Cheers
Wotto
-
Heres a shot with measurements of what I have.
(http://img258.imageshack.us/img258/2779/img8117wl9.jpg)
(http://img10.imageshack.us/img10/2438/img8118gx1.jpg)
This is only the top half, there is more to this drop target where I have the blue dash lines but I have no idea what that section looks like or its length. This is snapped off right where the little 8mm 'resting ledge' finishes ( at the bottom of the 37mm marking )
I have looked at Pinball Resouce site as well and I cant see them there - unless I am blind?
Cheers
Wotto
-
It looks to be a standard Gottlieb Drop Target.
what artwork is meant to be on them ?
-
Hey Wotto, Drop target is from a system 80...
My dimensions seem to be different... ::)
For starters the head is the same height @ 28 mm but the width is narrow @ 23 mm..
The shaft seems to be a little different going by your pics ! !@#
have a look at the pics and let me know... If you want it its yours..
-
Pm sent - thanks mate
-
Wotto mate,
I fixed up a Freddy a few years back and im pretty sure i had to replace a few targets and bought some spares - how may you need? i have at least one!
-
Wotto mate,
I fixed up a Freddy a few years back and im pretty sure i had to replace a few targets and bought some spares - how may you need? i have at least one!
Excellent Gavin, hows that ! #*# ^^^
-
The ones i had to replace were snapped in half also. I was pretty sure that it was due to the tension on the screws that hold em in place - too tight and they dont drop,and ball can snap them as target absorbs all the force.
Just a theory... but i like it, sounds sort of "techy"
-
Thanks Gav - PM sent @@*
-
its just the standard gtb drop used on games such as Stargate, Freddy etc
there on my site if you don't luck out with Gav (art work Nino are decals and I'm sure Watto can handle that part)
just a thought should they be black drop targets on Freddy?
-
Ones i have are black and i have 2 types also!
-
its just the standard gtb drop used on games such as Stargate, Freddy etc
there on my site if you don't luck out with Gav (art work Nino are decals and I'm sure Watto can handle that part)
just a thought should they be black drop targets on Freddy?
Black,and the decal is a picture of broken glass.
-
good to see you back, have you finished sitting on your arse in sunny Qld
-
good to see you back, have you finished sitting on your arse in sunny Qld
Missed you shit stirring me. Tried calling you.
-
good to see you back, have you finished sitting on your arse in sunny Qld