The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: felixthadog on March 31, 2009, 03:24:39 PM
-
Diverting for a moment from this thread -> http://aussiepinball.com/index.php?topic=1080.0 (http://aussiepinball.com/index.php?topic=1080.0)
Could somebody who owns a TZ please, please, please remove the connector to the Knocker assembly in the backbox and test to see if "Solenoid 7" is present in the SOLENOID TEST menu and/or "A3. 21" is present in the PRICING ADJUSTMENTS menu? @@^
Thanks,
Matthew
-
Yes and yes.
Just because your knocker isn't working does not change the menu burnt into the ROM, I do understand what you are looking for though as disscussed in your previous post.
I have disconnected to confirm for you they both appear, but obviously the knocker does not fire.
-
Yes and yes.
Just because your knocker isn't working does not change the menu burnt into the ROM, I do understand what you are looking for though as disscussed in your previous post.
I have disconnected to confirm for you they both appear, but obviously the knocker does not fire.
Thanks Matt, it wasn't the answer I was hoping for but at least now I know.
Matthew
-
No worries mate, by the way my rom is the Home 9.4 ROM.
Good luck sorting it out
-
That's good, it rules out another possibility.
-
The jumpers were the problem! W17 and W18 had been switched off, I switched them back on and hey presto, Solenoid 7 shows up in the Test Menu $#$
Thanks to everyone that responded, especially Andrew who was spot on with his diagnosis about the jumpers #*#
Cheers,
Matthew
-
Well done, Andrew !
Enjoy your game, Matt $#$
-
Glad you got it sorted