The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Mods => Custom Games => Topic started by: swinks on May 04, 2015, 12:00:08 AM
-
Could graphics be applied using printed rice paper and then sealed with a clear coat?
I was checking out a mates surfboard last week and he showed me the logo that he applied under the fibreglass work. He printed a coloured design on to rice paper and then glassed over the rice paper and the printed design and the rice paper could no longer be seen. I am curious if this same approach could be done for possible playfield repairs but more curious for a one off designed playfield. This would be alot cheaper than trying to get a playfield screened and have not heard of anyone in Australia doing direct printing.
Was thinking:
1. cut the playfield out and install inserts and apply a white coat to all areas of graphics to be applied maybe using a cut mask and then a clear coat ?.
2. get a full design printed on rice paper and resin over sealing the art to the playfield
3. possible apply one coat of glass over the art ??
4. apply a few coats of clear ????
found this on the net and the art printing could be a cheap alternative for those one off's
http://www.boardlams.com/products/your-board-logos-design
though just need to find an aussie printer
here is a example on a surfboard, lining up spot on probably would need 2 people
Has anyone tried this, any thoughts from anyone or those who are experienced surfboard makers
-
Not sure about rice paper mate but clear coat over a Mylar just breaks off with the ball dropping onto it. But it's worth a try
-
I will experiment with this soon and from reading since it has a 100% α-cellulose structure the clear in theory and definitely resins pass through it, and not sit on top of it like mylar I am guessing as the clear probably isn't attaching well to the mylar making it brittle...??? (wild guessing around that statement)
this looks like the particular type to use for printing - hahnemuhle rice paper
http://www.des-pl.com.au/products/shop-by-category/aqueous-media/fineart/matt-fineart-smooth/hahnemuhle-rice-paper-100gsm
found another video showing another technique - am thinking you could apply the design (with register marks) and then let it cure and then route the inserts and switch slots etc setting the playfield / cnc router with register marks and then clearing.
-
this guy knows what he is doing
-
Interesting, will be curious how you go with this.
-
Jady,
IF you want to do a small test on some ply, I've got a clear coat guy here we can use.
-
I am going to check up with a local art shop to see if they have the particular rice paper if not call a couple of surf board maker and go from there
cheers for the offer.