The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: lanternau on September 03, 2018, 05:26:10 PM
-
I am trying to track down one of these from my Triple Strike ( Cam Motor??). Mine is well and truly fried.
Cheers in advance
-
Some motor lamination seperate to enable coil replacement, here's one where I had to manually wind a coil to get the motor up and running again. Have a close look at your laminations.
Ofcourse if you can get a new one that's the way to go.
-
Thanks for getting back.
I may have to do as you have done and re wind my coil if i cant get one.
I have never done one before. Is there any reference on how it is done? E.g type of laminated wire, number of windings and how to wind the bugger.?
Cheers
-
Are you able to seperate the coil from the laminations?
If you can and decide to do it yourself, let me know and I will give you the info to do it.
Cheers
-
Thanks everyone...all sorted. Able to source a NOS unit . Not cheap but machine is all up and going.
Cheers
-
Excellent,best outcome