The Aussie Pinball Arcade

Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: mgjock on January 10, 2009, 07:15:52 PM

Title: fuse question?
Post by: mgjock on January 10, 2009, 07:15:52 PM

fuse question?

hi,

i'm repairing an EM pinball which requires a 15-Amp fuse 24 Volts. I can only find a 15-Amp 250 Volts fuse to buy at the shop. Will this fuse be ok? Or do I need to find the correct voltage fuse? Any help will be appreciated.

thanks

Title: Re: fuse question?
Post by: illawarra_steelers on January 10, 2009, 07:20:35 PM

That fuse is fine

Title: Re: fuse question?
Post by: jyebow on January 10, 2009, 11:29:55 PM

Like Tony said thats fine.
I learnt the hard way , Always make sure that the fuse is the right Amp ( current) rating. I bought a pin which was "over" fused & I didn't check the fuses . I found out when 2 pop bumper coils got smoked. !!! Now I always check fuse ratings before turning on a new pin.
Hope this experience helps someone out there.
Cheers Steve.