The Aussie Pinball Arcade
Aussie Pinball Forums => General Chat - Non Pinball/coin-opp Discussion => Topic started by: ddstoys on April 12, 2009, 09:25:34 PM
-
Has anyone here installed a trackball before ive converted an old cabinet into a Golden Tee 2000 but the kit never had any bolts to hold the Trackball. Ive been to the local nut and bolt place but they have nothing im after. Any ideas?
-
.
-
try these
http://www.arcadeparts.com.au/shop/index.php/11/65_4_X_5mm_X_35mm_Bolt_And_Nut_Set
-
If you are mounting the trackball into the original steel mounting frame you will need 4 x 10-32 x 2 1/2" bolts. Kind regards. Coin Play