The Aussie Pinball Arcade
Aussie Pinball Forums => Custom Games => Pinball Mods => NPC - Coconut Island => Topic started by: pinnies4me on October 10, 2008, 07:45:49 PM
-
The routing template has arrived, its shown here in the first photo. Using Nuggy's specially made insert routing tool (photo 2) a test cut was made (photo 3). You can see the snug as a bug in a nug insert in place in photo 4.
Looks like the Pinball Non-Factorium is about to swing back into full-production mode! :D
http://www.users.on.net/~spaners/Coconut%20Island/index.html
(http://aussiepinball.com/image1.jpg)
(http://aussiepinball.com/image2.jpg)
(http://aussiepinball.com/image3.jpg)
(http://aussiepinball.com/image4.jpg)
-
Nick - You guys make it look easy - Well done.
Nothing like a good "route" :D
Keep the updates coming.
-
Exciting stuff, looking good! ^^^
-
Looks like a lot of work ;-)
Where did you guys get the inserts?
-
The inserts were from Pinball Resource - "1/4 pound of assorted inserts" (2 bags) for $10.00 each. Bit of a compromise, we could do with a few specific ones but they aren't that readily available unfortunately.
-
Great job man. I cannot believe you all have gotten this far. I have watched quietly but seen this grow from early days.