The Aussie Pinball Arcade

Aussie Pinball Forums => Custom Games => Pinball Mods => NPC - Coconut Island => Topic started by: pinnies4me on January 10, 2009, 12:33:19 PM

Title: Some clearcoating....
Post by: pinnies4me on January 10, 2009, 12:33:19 PM

The completion is now in sight...

Title: Re: Some clearcoating....
Post by: Strangeways on January 10, 2009, 12:36:26 PM

Looks very nice...

How long until you can populate the playfield ?

Title: Re: Some clearcoating....
Post by: pinnies4me on January 10, 2009, 12:48:42 PM

I need to get over this weekend to sign the playfield before the final coats go on. I suspect a couple of weeks before final lock down of parts to allow the clear to cure, but there's lots can be done in the meantime so that it is right to go once the re-population is done. Can't wait to play it with the clear! I'm thinking it's going to have an almost AFMish type ball speed, slightly on the wicked side! 

Title: Re: Some clearcoating....
Post by: ktm450 on January 10, 2009, 08:38:18 PM

Awesome work guys, can't wait for a game!!! &&

Title: Re: Some clearcoating....
Post by: Nug on January 11, 2009, 08:15:24 AM

yes most is progressing well...have had a small issue with the CCC toy bit but it has cured and locked down know ! phew, will need to resand this piece but you will not see the 5 cent coin sized blemish(and what do you know...the blemish has my fingerprint in it !! silly nug !)

im thinking it may be too fast !  this diamond tough floor clear really gets a hard shell effect.   *%*

it should also be pointed out the jackpot picture is a test piece for compatabilities and also CC looks and feel tests.

regards

Title: Re: Some clearcoating....
Post by: Retropin on January 11, 2009, 10:44:59 AM

mmm - thats a yummy finish youve got there! How many coats did you apply?