Author Topic: Stern Playboy - DMD Dodgey  (Read 284 times)

0 Members and 1 Guest are viewing this topic.

Offline Zarnet

  • Trade Count: (0)
  • **
  • Forum Posts:
Stern Playboy - DMD Dodgey
« on: July 21, 2013, 06:23:24 PM »
Hi,

I've got 2 Stern Playboys, one's DMD simply freezes while the machine happily plays on.  Every now and again it may come back.

I thought I'd buy a nice one with a few nice mods but it also has DMD problem, please see picture below.  I get weird shading on only a few screens, other then that the DMD is fine.

I have reseated most cables etc.  Am I on the right track?

[/URL][/img]

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Stern Playboy - DMD Dodgey
« Reply #1 on: July 21, 2013, 08:44:11 PM »
Isolate the issue by swapping the DMDs themselves, the cables and then the DMD board. That will narrow it down to the DMD or the driver board. Is there any corrosion near the CPU / ROM / PAL chip (near the battery) ?
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia