The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Pinballs wanted => Topic started by: Cow Corner on December 30, 2012, 07:21:39 PM
-
$.$
I am chasing one or both of these. Good $$$ paid for one in very good condition.
Anyone wnat to sell..pm etc..yadda yadda.
()
-
Found a wh20 now BUMP for the Dr.
Bump Bump Bump
-
BUMP!!!
(((
-
Have you tried the usual suspects, or would you rather a private machine ?
-
Have you tried the usual suspects, or would you rather a private machine ?
I have tried the usual suspects here in Brisbane.
Private machine would be better, there is a vn wh20 from a private seller up this way but the $$ being asked are a bit extreme.
-
Good luck with your search for a Dr Who but they all come very faded.
However, I have FULL CABINET DECALS AVAIL FOR DR WHO * Colourful as the rainbow n what a difference they make to a faded machine.
I have a brand new set of full cabinet n headbox n coindoor colour cabinet ETC decals for a DR WHO PINBALL MACHINE if anyone/you are interested.
$300 including postage to anywhere in Australia. They owe me more than that but my loss is your gain.
Email me via a PM or boschalarms@hotmail.com if anyone is interested.
-
i have a dr who machine and the very same full set of decals not yet installed.(hi brett,see ya soon)my playfield has zero wear,plastics are good,no chips or scratches.The machine is working 100 %,with refurbished driver board(5v caps and bridges done)+refurbed fliptronics,sorry new fliptronics board.THE BAD cab faded and security bar holes in the front need filling when someone does the re-decal.pluss its in SA.your call COW $2800 packet for delivery of your choice.
damien
P.s. for got to add that i have installed a brand new mini-playfield motor from the us.
-
i have a dr who machine and the very same full set of decals not yet installed.(hi brett,see ya soon)my playfield has zero wear,plastics are good,no chips or scratches.The machine is working 100 %,with refurbished driver board(5v caps and bridges done)+refurbed fliptronics,sorry new fliptronics board.THE BAD cab faded and security bar holes in the front need filling when someone does the re-decal.pluss its in SA.your call COW $2800 packet for delivery of your choice.
damien
P.s. for got to add that i have installed a brand new mini-playfield motor from the us.
Cheers mate, I will have a think about it.
Would prefer one local that I could inspect/ play if possible.