Aussie Pinball Forums > Technical Matters

Williams Flash RHS flipper Help

(1/2) > >>

Pinballrocks:
Hi all,
I am not convinced my RHS flipper EOS switch is wired correctly to the solenoid
Does anyone have a Williams flash that they could snap a pic of the wiring/ connection points as I cant seem to find a clear picture of this.
Any help would be great.


Cheers
Paul.

punkin:
 :D <..>

Pinballrocks:
Thanks for the pics.
Does the far LHS leaf blade have no wires attached?
Also i cant quite make out which wires are soldered to which switch blade and which ones are connected to the solenoid.
Sorry to be a pain and i appreciate your help mate.
Cheers Paul

Strangeways:
Have a look over the Reconditioning Job I did years ago ;


http://aussiepinball.com/index.php?topic=9062.0


Or jump to the page with the photo. If that does not help (your photos were not that clear to me) - Do you have the manual / schematic ?


http://aussiepinball.com/index.php?topic=9062.15

Pinballrocks:
Thanks, I will. ^^^

Navigation

[0] Message Index

[#] Next page