The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: Crashramp on December 11, 2014, 08:57:37 PM
-
Hi guys,
Anyone have a nos or repo drive wheel for Bride of Pinbot that they'd be willing to part with? I think these are also used in Twilight Zone as well but they don't seem to be available anywhere anymore. Part numbers #03-8476
(http://tapatalk.imageshack.com/v2/14/12/11/f09210a631dd8721495f907662cac329.jpg)
-
if you can borrow one, I would be happy to help you out and design and make available via shapeways. The least I can do for you mate.
yes, you are right used on both
http://bayareaamusements.com/Merchant2/merchant.mvc?Store_Code=BAA&Screen=PROD&Product_Code=MX-03-8476
-
if you can borrow one, I would be happy to help you out and design and make available via shapeways. The least I can do for you mate.
yes, you are right used on both
http://bayareaamusements.com/Merchant2/merchant.mvc?Store_Code=BAA&Screen=PROD&Product_Code=MX-03-8476
That would be great Jady, I really appreciate the offer. I'll give it a bit of time for one to turn up before I hassle you with it though. Thanks again. ^^^
-
I found a different pic not not sure which one is correct as that first one is a little funky. If it is like this one I could design easily in a night if someone could share some dimensions.
offer is there.
-
Will have a look for you Adam. Thought I had one but found similar for the clock. Will check out my other tz stuff this weekend. Fingers crossed. This must be for the gumball machine???
-
here is a quick 10min sketch, just need a few dimensions and give you a file and get these machined out of the cutting board material.
-
Will have a look for you Adam. Thought I had one but found similar for the clock. Will check out my other tz stuff this weekend. Fingers crossed. This must be for the gumball machine???
Thanks Rob that would be great, much appreciated. ^^^
here is a quick 10min sketch, just need a few dimensions and give you a file and get these machined out of the cutting board material.
Thanks Jady, that's Awesome! Mines worn in places so it causes issues with the face alignment on my BoP but it's still good enough to take measurements from. It's a little tricky to get at but if Rob doesn't have any luck locating one I'll pull mine apart on the weekend and get some measurements.
-
Failed. I have all the stuff for the clock but jack for the gumball. Sorry mate. Thought I'd look tonight instead of keep you hanging.
-
http://www.flipperwinkel.nl/winkel/contents/nl/d704.html
This guy has one
-
go the dutch, nice find Rob, never heard of that site before.
-
go the dutch, nice find Rob, never heard of that site before.
can't read a thing though ^&^
-
go the dutch, nice find Rob, never heard of that site before.
can't read a thing though ^&^
Your a legend Rob, great find! I think I just brought one.....can't be sure, I don't read Dutch either. %.%
Just spent the last 10 min on the Dutch to English translator trying to workout how to order. I think it was the last in stock as it wouldn't let me buy 2 of them.
-
Can't complain about the service, I just received an email that its shipped already and a partial refund on my postage. Pretty impressive since it would be lucky to be 20 minutes since I ordered.
-
Might be worth getting Jady to make one up before you install it Adam if they are getting that hard to find.
Must be good news if you are back onto getting BOP sorted. Other machines are behaving themselves now?
-
go the dutch, nice find Rob, never heard of that site before.
can't read a thing though ^&^
Your a legend Rob, great find! I think I just brought one.....can't be sure, I don't read Dutch either. %.%
Just spent the last 10 min on the Dutch to English translator trying to workout how to order. I think it was the last in stock as it wouldn't let me buy 2 of them.
excellent, I was disappointed when I didn't have one. Yeah my dutch is as good as my Chinese. I wish I could get that quick a service at a supermarket let alone half way across the planet
-
Other machines are behaving themselves now?
You know what it's like Blair, all depends on the day. I find they work better when I stop trying to fix things %.%
-
congrats, still send me the dimensions so I can finish and then it is there if anyone needs them, only about 5minutes left to complete.
-
congrats, still send me the dimensions so I can finish and then it is there if anyone needs them, only about 5minutes left to complete.
I defiantly will Jady, I'd been looking for one for months, even sent emails to many suppliers and they all said they were no longer available. Plenty of BoP's and TZ's around, I'm sure I'm not the only one who needed one.
-
part arrived in the mail and finished the design today