The Aussie Pinball Arcade
Aussie Pinball Forums => Pinball Trader => Parts wanted => Topic started by: ddstoys on August 31, 2011, 03:15:02 PM
-
%.%. It's a long shot but worth asking. %.%
I offered to take a look at this machine for a guy I gave him a very low success rate like it will never go so he didn't get his hopes up.
Very unusual one of a kind setup.
-
never heard of it - EM or SS?
-
Hmmm, interesting backglass - kinda David Bowie with boobs!
-
That is going to be hard to find information on, I imagine.
I guess if the boards are all there it won't be impossible to work out what is going on, though.
-
Now that's a strange machine if ever I saw it :D
-
The display looks like a Gottlieb sys 80 ???
Ian
-
The display looks like a Gottlieb sys 80 ???
Ian
It does - and their earlier EM's seem to have copied Gottliebs - so what's the chances they copied the Gottlieb System 1 board set I wonder? As they only made one SS game, that would explain it given the problems with that system back then.
-
Absolutely nothing like a system 1 board I'll post some photos once I start work on it. In desperate need of a schematic etc before I even bother I've checked all the usual suspects dry joints connectors etc with no joy
-
Absolutely nothing like a system 1 board I'll post some photos once I start work on it. In desperate need of a schematic etc before I even bother I've checked all the usual suspects dry joints connectors etc with no joy
Have you tried on RGPArchive.com Daniel? I'd be surprised if nobody on there could help.
-
No Marty never even been there but I'll check it out
-
Found an Italian site that seems somewhat active, so posted this for you Dan -
Ciao dall'Australia. Vi prego di scusare il mio italiano, non è troppo buono.
Qualcuno può aiutarmi con informazioni o schemi per Nordamatic Antares?
grazie
Nick
I'll let you know what they come up with!
-
Thanks Nick
Much appreciated ^^^
-
Wouldnt mind seeing some pics of the boards.... hopefully it will all be TTL and not too difficult to determine what does what.
If its CMOS like a ZAC.. id say your stuffed without a schematic
-
Found an Italian site that seems somewhat active, so posted this for you Dan -
Ciao dall'Australia. Vi prego di scusare il mio italiano, non è troppo buono.
Qualcuno può aiutarmi con informazioni o schemi per Nordamatic Antares?
grazie
Nick
I'll let you know what they come up with!
Very good translation Nick ! A bit more Nothern Italian (I think).
-
Very good translation Nick ! A bit more Nothern Italian (I think).
Between me, google translator and my beautiful Sicilian wife, that was the best we could come up with!!
-
All that effort for me thanks Nick and also thank your lovely wife.
-
All that effort for me thanks Nick and also thank your lovely wife.
Might have been to no avail, no replies yet..... :(