The Aussie Pinball Arcade
Aussie Pinball Forums => Technical Matters => Pinball Repairs / Problems & Assistance => Topic started by: andtan on October 10, 2012, 06:44:55 PM
-
Hi guys,
Can anyone with a HS2 help me with a couple of part numbers?
In the attached photo I'm trying to work out the correct star post, and post just to the left of the bumber - the blue post circled in yellow. On my HS2 the post is missing and after looking at the manual I'm not sure if it is supposed to be a single or double rubber clear star post, and I have no idea which is the correct post that holds it down !@#
Cheers,
Andy
-
It should be a clear double post, and the one directly beside the pop a metal double post
-
I dont know whats the correct size but that blue post is wrong it actually looks like a Finn post
-
Sorry, @.@ the picture is actually from IPDB - I wish my playfield was that nice!!
So if it's a 'Double Star Post, Clear' (p/n: 03-8247-13) what is the correct metal post used to secure it?
-
Mine uses a crappy wood screw - and before you ask - YES, I did replace the rings before re-fitting the post <.>
(http://www.homepin.com/test/gw1.jpg)
(http://www.homepin.com/test/gw2.jpg)
(http://www.homepin.com/test/gw3.jpg)
-
Yep mine is like Mikes from memory, just a wood screw
-
Thanks guys,
If there's no no more bidding, then a wood screw it'll be ^^^