Author Topic: EM pinnie not resetting properly  (Read 1416 times)

0 Members and 1 Guest are viewing this topic.

Offline Pinball Fixers

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Montrose, VIC
Re: EM pinnie not resetting properly
« on: January 31, 2009, 11:35:05 PM »
Just my 2.2c worth, I tried vaseline, couldn't find anything else light, for years but as others warned it turns into a gunky mess soon after.
Lately I've tried PTFE (teflon) dry film lubricant which works well. Can buy it from auto shops.
I think, keep away from silicone lubes around electrical contacts as it is an insulator and can be hard to remove from contacts.

That's a fair point arcadoz, ptfe is better than using normal grease for lubricating gears and shafts - but don't use it on plungers.